The Elinchrom D-Lite 400W/s RX 4 Flash Head raises
the bar on the capabilities of a lightweight, portable strobe. The
auto-sensing, multi-voltage flash D-Lite RX 4 recognizes any AC power
source from 90-260VAC, allowing power variability over 5.0 stops in 1/10
stop increments. Recycling is a lightning-fast 0.35-1.6 sec. (115V)
with flash durations as short as an action-stopping 1/800 sec at full
power. But that's just the beginning.
The D-Lite 400W/s RX 4 is packed with professional and convenience
features usually found in flash heads twice its price. Forget about
tripping over PC cords. Although this head accepts one it also has a
built-in EL-Skyport Receiver with eight frequency channels that can
handle four distinct groups of flashes. Separate purchase of the EL
Skyport ELS Speed Transmitter not only allows you to trigger your flash
at distances up to 393' but gives you control of power on/off, modeling
light functions and Speed Sync activation. Free software for Mac and PC
computers is available, providing additional features such as
Flash-Delay for strobing effects. Add an optional Wi-Fi module to the
transmitter and you can use specially designed apps that allow full
remote control via your for iPhone, iPad or iPod Touch.
D-Lite 400W/s RX 4's bayonet mount accepts all Elinchrom accessories and
softboxes up to 53" (135 cm). It comes with a power cord with a U.S.
plug, sync cord, flash tube and protective cap. The included 120V 100W
modeling lamp must be swapped out when using the unit in nominal 230V