The Elinchrom D-Lite RX One Flash Head is a 100W/s
auto-sensing, multi-voltage monolight that recognizes any AC power
source from 90-260VAC, allowing power variability over 5.0 stops in 1/10
stop increments. Recycling is a fast 0.5-2.1 sec. (@115V) with flash
durations as short as an action-stopping 1/1,100 sec at full power.
The D-Lite RX One is packed with professional and convenience features
usually found in flash heads twice its price. Although this head accepts
one, you won't need a PC cord. It has a built-in EL Skyport Receiver
with 8 frequency channels that can handle 4 distinct groups of flashes.
Separate purchase of the EL Skyport Speed Transmitter not only allows
you to trigger your flash at distances up to 393' but gives you control
of power on/off, modeling light functions and Speed Sync activation.
Free software for Mac and PC computers is available, providing
additional features such as Flash-Delay for strobing effects. Add an
optional WiFi module to the transmitter and you can use specially
designed apps that allow full remote control from your for iPhone, iPad
or iPod Touch.
D-Lite RX One's bayonet mount accepts all Elinchrom accessories and
softboxes up to 53" (135 cm). It comes with a power cord with a U.S.
plug, sync cord, flash tube and protective cap. The included 115V 100W
modeling lamp must be swapped out when using the unit in nominal 230V
Flashtube for D-Lite 2, 4 and Ranger Quadra S Flash Heads
PC to 3.5 mm Sync Cord (16'/5.0 m)
Protective Cap for Glass Dome, for Elinchrom
Modeling Lamp - 100 watts/90 volts - for EL250, EL250C