Elinchrom's EL-Skyport RX Trigger Set
includes a Skyport SPEED Transmitter, 2 ELS RX Transceivers, and a 7.8"
(19 cm) sync cord, with which you can change the flash output, and
control the modeling light, and flash synchronization on the Style RX
300/600/1200, Digital RX 1200/2400, Ranger RX/Ranger RX Speed/Ranger RX
Speed AS (the Ranger battery power pack requires the EL-Skyport
Transceiver RX Adapter, 19374).
The RX Trigger Set works
at distances up to 196' (60 m) indoors; up to 393' (120 m) outdoors, and
up to 1/250s shutter speed. It can control flashes in 4 selectable
workgroups, and there are 8 frequency channels. To control all RX
functions (such as as Strobing, Counter and more) of Style RX, Ranger
RX, Ranger Quadra RX (only Ranger Quadra RX with serial numbers from
4001 onwards) and Digital RX from a computer, the USB Transceiver RX
19354/19348 (not included) and the latest EL Skyport software (not
included) are required. With 40-bit security, you get interference-free
The transmitter can synchronize remote flash units
when each is fitted with either a "Universal" receiver fitting all
flash brands (not included) or the included Transceiver RX (fitting
Style RX, Digital RX and Ranger RX units) or units with EL-Skyport
Transceiver built-in (BXRi 250/500 & Ranger Quadra AS). The
transmitter operates using an internal rechargeable battery that's good
for up to 30,000 flashes. The transceiver operates without a battery,
drawing power from the strobe it's attached to.