View Larger
 
DJI S1000 Premium Octocopter with WooKong-M Flight Control System
SKU: 36682  

 
Estimated Order Processing Time : Special Order - Call for Availability
Price:  
$4,090.00
Qty: 
 
The Spreading Wings S1000 Professional Octocopter from DJI is a collapsible, eight-propeller RC helicopter designed to carry a DSLR or similar-sized camera. The aircraft is intended to serve as a platform, allowing professional videographers and photographers to add dynamic aerial shots to their productions. 

For stabilizing and moving a camera in flight, the S1000 is compatible with any of the Zenmuse Z15 series gimbals. The airframe features a dampened gimbal mounting bracket with a low mounting position. Additionally, the landing gear can be raised, allowing an unobstructed 360° of visibility.

The S1000 is designed to use 6S lithium-polymer batteries. It will support capacities between 10,000 and 20,000mAh, and requires a discharge rate of at least 15C. With a 15,000mAh battery and a take-off weight of 21 pounds, it is estimated to fly approximately 15 minutes.

Note: Assembly is required 

Performance Take-Off Weight and Flying Time Weighing approximately 9.3 pounds, the S1000 is able to support a take-off weight of up to 24 pounds. This means it can handle camera payloads up to the approximate size of a Canon EOS 5D Mark III. With a 21 pound take-off weight and a 15,000mAh battery it features an estimated flying time of approximately 15 minutes Propulsion System At the end of each prop arm is a 40A electronic speed controller (ESC). When combined with its 4114 pro motor and high performance 1552 folding propellers, it is capable of a maximum thrust of 5.5 pounds 
 Camera Mounting Low Gimbal Mounting Position The S1000 supports all of DJI\'s Zenmuse Z15 series gimbals for camera stabilization and control. The frame keeps the gimbal low, using a specially designed bracket. Additionally, the landing gear retract in flight so that full camera panning is possible Damping Design The gimbal and battery are mounted on the same bracket, with dampers placed between the bracket and the frame. This is designed to significantly reduce high-frequency vibrations to help make shots clearer and sharper. The battery tray\'s position also makes it more stable and accessible for mounting and dismounting Airframe Design Foldable Propellers and Collapsible Frame All eight arms can be completely folded down and the 1552 folding propeller can be tucked away, minimizing the S1000\'s size for transportation. To fly, simply lift the frame arms up, lock them in place with the red clips, and power up the system Efficient V-Type Mixer The mixer in the S1000 is designed to provide large amounts of propulsion while maintaining power efficiency. Acting in tandem with the flight control system, it will work to keep the aircraft stable and flying even after the loss of a rotor. Integrated into the center frame is a power distribution system using DJI's proprietary coaxial cable connector

The mixer is designed to be easier to install or replace by eliminating the need for soldering. All frame arms as well as the retractable landing gear are made from carbon fiber, to help ensure a low weight profile and high structural stability Inclined Prop Arm Each prop arm features 8° inversion and a 3° inclination, making the aircraft more stable when rolling and pitching, and at the same time more flexible when rotating Sparkproof Plug The main power cord uses an AS150 sparkproof plug for positive and a XT150 plug for negative to prevent accidentally mixing up polarities, and preventing short circuits that could damage sensitive electronics

Product Highlights 
 Designed to Carry DSLR-Sized Camera Collapsible Frame and Folding Props Up to 24 Pound Take-Off Weight Up 15 Minutes Flying at 15,000mAh Low Gimbal Mounting with Dampening Retractable Landing Gear Supports A2 and WooKong-M FCs
DJI Spreading Wings S1000 Professional Octocopter Limited 1-Year Warranty on ESC and MC; Limited 6-Month Warranty on GPS, IMU, and Motors
Go To Frame Motor Propeller Flight Parameters Frame Frame Arm Weight 11.5 oz / 325 g Center Frame Diameter 13.3\' / 337.5 mm Center Frame Weight With Landing Gear Mounting Base and Servos: 46.9 oz / 1,330 g Landing Gear Dimensions L x W x H: 18.1 x 20.1 x 12\' / 460 x 511 x 305 mm
Top Width: 6.1\' / 155 mm Motor Stator Size 41 x 14 mm Motor Velocity Constant Kv: 400 rpm/V Maximum Power Consumption 500 W Weight With Cooling Fan: 5.6 oz / 158 g Propeller Material High strength performance engineered plastics Dimensions 15 x 5.2\' / 381 x 132 mm Weight 0.5 oz / 13 g Flight Parameters Supported Flight Control Systems DJI A2, DJI WooKong-M Take-Off Weight 13.3 to 24.2 lb / 6 to 11 Kg Total Weight 9.3 lb / 4.2 Kg Battery Requirements Lithium-polymer (LiPo)
 Average Rating:  0 Star Rating
0.0